Retatrutide 40MG
$140.00
20 in stock
Dosage Information
- Reconstitute: Add 2.0 mL bacteriostatic water → ~20.0 mg/mL concentration.
- Typical weekly range: 2–8 mg once weekly (gradual escalation over 8–12 weeks).
- Easy measuring: At 20.0 mg/mL, 1 unit = 0.01 mL ≈ 200 mcg on a U-100 insulin syringe.
Storage: Lyophilized: freeze at −20 °C (−4 °F); after reconstitution, refrigerate at 2–8 °C (35.6–46.4 °F) for up to 4 weeks
| Week | Daily Dose (mcg) | Units (per injection) (mL) |
| Weeks 1–4 | 2 mg (2000 mcg) | 10 units (0.10 mL) |
| Weeks 5–8 | 4 mg (4000 mcg) | 20 units (0.20 mL) |
| Weeks 9–12 | 6 mg (6000 mcg) | 30 units (0.30 mL) |
| Weeks 13+ | 8 mg (8000 mcg) | 40 units (0.40 mL) |
- Labs Attested
- COA Included
- For 21+ Only
- US Sourced
Product Description:
Retatrutide (also known as LY3437943) is an investigational synthetic peptide developed by Eli Lilly. It is a triple receptor agonist designed to simultaneously activate three key hormone receptors: GLP-1 (glucagon-like peptide-1), GIP (glucose-dependent insulinotropic polypeptide), and glucagon (GCGR).
It is a single peptide molecule with a fatty acid modification (acylation) that extends its half-life, allowing for once-weekly subcutaneous injections.
How It Works
Retatrutide’s triple-agonist mechanism targets multiple metabolic pathways for synergistic effects:
- GLP-1 receptor activation: Suppresses appetite, slows gastric emptying, enhances insulin secretion (glucose-dependent), and promotes satiety.
- GIP receptor activation: Improves insulin sensitivity, supports fat metabolism, and further enhances appetite regulation (building on the success of dual agonists like tirzepatide).
- Glucagon receptor activation: Increases energy expenditure (calorie burning), promotes lipolysis (fat breakdown), and helps reduce liver fat, while being balanced to avoid excessive hyperglycemia.
This multi-pathway approach leads to greater appetite suppression, improved glucose control, increased metabolic rate, and significant fat loss (especially visceral and liver fat) compared to single or dual agonists.
Potential Benefits and Why People Use It
In clinical trials (Phase 2 and early Phase 3 data as of 2026), retatrutide has shown impressive results, often outperforming existing options:
- Substantial weight loss: Up to ~24% body weight reduction at 48 weeks in Phase 2 (higher doses), and around 28% in some Phase 3 reports at longer durations — approaching or exceeding bariatric surgery outcomes for many participants.
- Improved metabolic health: Better glycemic control (HbA1c reductions), reduced liver fat (beneficial for NAFLD/NASH), improved lipid profiles, and lower blood pressure.
- Additional benefits: Potential improvements in cardiovascular risk factors, sleep apnea, osteoarthritis pain, and overall body composition.
It is primarily researched for obesity, type 2 diabetes, and related metabolic conditions. Its triple action makes it a promising “next-generation” option after semaglutide (GLP-1 only) and tirzepatide (GLP-1 + GIP).
Important Caveats
- Regulatory status: Not FDA-approved as of mid-2026. It remains investigational, with Phase 3 trials ongoing and potential approval projected for late 2026–2027. Research-grade or compounded versions carry quality and legal risks.
- Side effects: Primarily gastrointestinal (nausea, vomiting, diarrhea, constipation) — common with this class, often during dose escalation. Other possible effects include increased heart rate, injection-site reactions, or fatigue. Generally well-tolerated with low discontinuation rates in trials, but monitoring is essential.
- Safety: Long-term data is still emerging. Not suitable for everyone (e.g., contraindicated in certain thyroid or pancreatic conditions). Banned by WADA for athletes.
Bottom line: Retatrutide represents a significant advancement in weight-management peptides due to its triple-agonist design, delivering potentially superior weight loss and metabolic benefits. For your EDB LLC peptide products, emphasize its research/experimental status, high-purity sourcing, strong disclaimers, and the critical need for professional medical supervision. As with your other offerings (BPC-157, TB-500, IGF-1 LR3, Tesamorelin, MOTS-c, CJC-1295/Ipamorelin, etc.), position it educationally within a research context. Always recommend consulting a qualified healthcare professional before considering use.
You may also research
Related Compounds
BPC 157\TB-500
- Reconstitute: Add 3.0 mL bacteriostatic water → 3.33 mg/mL concentration.
- Typical daily range: 200–600 mcg once daily (gradual titration).
- Easy measuring: At 3.33 mg/mL, 1 unit = 0.01 mL ≈ 33.3 mcg on a U-100 insulin syringe.
- Storage: Lyophilized: freeze at −20 °C (−4 °F); after reconstitution, refrigerate at 2–8 °C (35.6–46.4 °F); avoid freeze–thaw cycles.
| Week | Daily Dose (mcg) | Units (per injection) (mL) |
| Weeks 1–2 | 200 mcg (0.2 mg) | 6 units (0.06 mL) |
| Weeks 3–4 | 400 mcg (0.4 mg) | 12 units (0.12 mL) |
| Weeks 5–8+ | 600 mcg (0.6 mg) | 18 units (0.18 mL) |
BPC-157
BPC-157 is dosed at 200 mcg–600 mcg daily via subcutaneous injection in educational protocols. A 5 mg vial reconstituted with bacteriostatic water yields about 1.67 mg/mL. This information is for research and educational use only.
- Reconstitute: Add 3.0 mL bacteriostatic water → 1.67 mg/mL concentration.
- Typical daily range: 200–600 mcg once daily (gradual titration).
- Easy measuring: At 1.67 mg/mL, 1 unit = 0.01 mL ≈ 16.7 mcg on a U-100 insulin syringe.
- Storage: Lyophilized: freeze at −20 °C (−4 °F); after reconstitution, refrigerate at 2–8 °C (35.6–46.4 °F); avoid freeze–thaw cycles.
Route: Subcutaneous | Frequency: Once daily
| Week | Daily Dose (mcg) | Units (per injection) (mL) |
| Weeks 1–2 | 200 mcg (0.2 mg) | 12 units (0.12 mL) |
| Weeks 3–4 | 400 mcg (0.4 mg) | 24 units (0.24 mL) |
| Weeks 5–8+ | 600 mcg (0.6 mg) | 36 units (0.36 mL) |
CJC-1295 no DAC\Ipamorelin
- Reconstitute: Add 3.0 mL bacteriostatic water → ~3.33 mg/mL total concentration (1.67 mg/mL each peptide).
- Typical daily range: 100–300 mcg of each peptide once daily (gradual titration).
- Easy measuring: At 3.33 mg/mL total, 1 unit = 0.01 mL ≈ 33.3 mcg of each peptide on a U-100 insulin syringe.
- Storage: Lyophilized: freeze at −20 °C (−4 °F); after reconstitution, refrigerate at 2–8 °C (35.6–46.4 °F); avoid freeze–thaw cycles.
| Week | Daily Dose (mcg) | Units (per injection) (mL) |
| Weeks 1–2 | 100 mcg each | 3 units (0.03 mL) |
| Weeks 3–4 | 150 mcg each | 4.5 units (0.045 mL) |
| Weeks 5–6 | 200 mcg each | 6 units (0.06 mL) |
| Weeks 7–12 | 250–300 mcg each | 7.5–9 units (0.075–0.09 mL) |
GKC-CU 100MG
- Reconstitute: Add 3.0 mL bacteriostatic water → ~33.3 mg/mL concentration.
- Typical daily range: 1–2 mg once daily (gradual titration over 12 weeks).
- Easy measuring: At 33.3 mg/mL, 1 unit = 0.01 mL ≈ 333 mcg on a U-100 insulin syringe.
- Storage: Lyophilized: freeze at −20 °C (−4 °F); after reconstitution, refrigerate at 2–8 °C (35.6–46.4 °F); use within 30 days.
| Week | Daily Dose (mcg) | Units (per injection) (mL) |
| Weeks 1–4 | 1.0 mg | 3 units (0.03 mL) |
| Weeks 5–8 | 1.5 mg | 4.5 units (0.045 mL) |
| Weeks 9–12 | 2.0 mg | 6 units (0.06 mL) |
GLOW
- Reconstitute: Add 3.0 mL bacteriostatic water → ~23.3 mg/mL concentration.
- Typical daily dose: 2,330 mcg (2.33 mg) once daily for 4 weeks.
- Easy measuring: At 33.3 mg/mL, 1 unit = 0.01 mL ≈ 333 mcg on a U-100 insulin syringe.
- Storage: Lyophilized: freeze at −20 °C (−4 °F); after reconstitution, refrigerate at 2–8 °C (35.6–46.4 °F); use within 4 weeks
| Week | Daily Dose (mcg) | Units (per injection) (mL) |
| Weeks 1–4 | 2,330 mcg | 70.5 units (0.70 mL) |
IGF1-LR3
- Reconstitute: Add 3.0 mL bacteriostatic water → ~0.333 mg/mL concentration (333 mcg/mL).
- Typical daily range: 20–50 mcg once daily subcutaneously (gradual titration recommended).
- Easy measuring: At 0.333 mg/mL, 1 unit = 0.01 mL ≈ 3.33 mcg on a U-100 insulin syringe.
- Storage: Lyophilized: freeze at −20 °C (−4 °F) for up to 12 months; after reconstitution, refrigerate at 2–8 °C (35.6–46.4 °F) and use within 30 days; avoid repeated freeze–thaw cycles.
| Week | Daily Dose (mcg) | Units (per injection) (mL) |
| Weeks 1–2 | 20 mcg (0.02 mg) | 6 units (0.06 mL) |
| Weeks 3–4 | 40 mcg (0.04 mg) | 12 units (0.12 mL) |
| Weeks 5–8 | 50 mcg (0.05 mg) | 15 units (0.15 mL) |
MOTS-c 20MG
- Reconstitute: Add 3.0 mL bacteriostatic water → ~6.67 mg/mL concentration.
- Typical daily range: 200–1,000 mcg once daily (gradual titration over 10 weeks).
- Easy measuring: At 6.67 mg/mL, 1 unit = 0.01 mL ≈ 66.7 mcg on a U‑100 insulin syringe.
- Storage: Lyophilized: freeze at −20 °C (−4 °F) or below; after reconstitution, refrigerate at 2–8 °C (35.6–46.4 °F) and use within 7 days for best potency.
| Week | Daily Dose (mcg) | Units (per injection) (mL) |
| Weeks 1–2 | 200 mcg (0.2 mg) | 3 units (0.03 mL) |
| Weeks 3–4 | 400 mcg (0.4 mg) | 6 units (0.06 mL) |
| Weeks 5–6 | 600 mcg (0.6 mg) | 9 units (0.09 mL) |
| Weeks 7–8 | 800 mcg (0.8 mg) | 12 units (0.12 mL) |
| Weeks 9–10+ | 1,000 mcg (1.0 mg) | 15 units (0.15 mL) |
| Week | Daily Dose (mcg) | Units (per injection) (mL) |
| Weeks 1–2 (Initial) | 600 mcg | 300 mcg BPC + 300 mcg TB-500 - 18 units (0.18 mL) |
| Weeks 3–4 (Loading) | 800 mcg | 400 mcg BPC + 400 mcg TB-500 - 24 units (0.24 mL |
| Weeks 5–8 (Maintenance) | 600 mcg | 300 mcg BPC + 300 mcg TB-500 - 18 units (0.18 mL) |
MOTS-C 40MG
- Reconstitute: Add 3.0 mL bacteriostatic water → ~13.33 mg/mL concentration.
- Typical daily range: 200–1,000 mcg once daily (gradual titration over 10 weeks).
- Easy measuring: At 13.33 mg/mL, 1 unit = 0.01 mL ≈ 133.3 mcg on a U‑100 insulin syringe.
- Storage: Lyophilized: freeze at −20 °C (−4 °F) or below; after reconstitution, refrigerate at 2–8 °C (35.6–46.4 °F) and use within 7 days for best potency.
| Week | Daily Dose (mcg) | Units (per injection) (mL) |
| Weeks 1–2 | 200 mcg (0.2 mg) | 1.5 units (0.015 mL) |
| Weeks 3–4 | 400 mcg (0.4 mg) | 3 units (0.03 mL) |
| Weeks 5–6 | 600 mcg (0.6 mg) | 4.5 units (0.045 mL) |
| Weeks 7–8 | 800 mcg (0.8 mg) | 6 units (0.06 mL) |
| Weeks 9–10+ | 1,000 mcg (1.0 mg) | 7.5 units (0.075 mL) |
PT-141
- Reconstitute: Add 3.0 mL bacteriostatic water → ~3.33 mg/mL concentration.
- Typical daily range: 500–1500 mcg once daily (gradual titration over 16 weeks).
- Easy measuring: At 3.33 mg/mL, 1 unit = 0.01 mL ≈ 33.3 mcg on a U-100 insulin syringe.
- Storage: Lyophilized: freeze at −20 °C (−4 °F); after reconstitution, refrigerate at 2–8 °C (35.6–46.4 °F); avoid freeze–thaw cycles.
| Week | Daily Dose (mcg) | Units (per injection) (mL) |
| Weeks 1–8 | 500 mcg (0.5 mg) | 15 units (0.15 mL) |
| Weeks 9–12 | 1000 mcg (1.0 mg) | 30 units (0.30 mL) |
| Weeks 13–16 | 1500 mcg (1.5 mg) | 45 units (0.45 mL) |
Retatrutide 20MG
- Reconstitute: Add 2.0 mL bacteriostatic water → ~10.0 mg/mL concentration.
- Typical weekly range: 2–8 mg once weekly (gradual escalation over 8–12 weeks).
- Easy measuring: At 10.0 mg/mL, 1 unit = 0.01 mL ≈ 100 mcg on a U-100 insulin syringe.
- Storage: Lyophilized: freeze at −20 °C (−4 °F); after reconstitution, refrigerate at 2–8 °C (35.6–46.4 °F) for up to 4 weeks.
| Week | Daily Dose (mcg) | Units (per injection) (mL) |
| Weeks 1–4 | 2 mg (2000 mcg) | 20 units (0.20 mL) |
| Weeks 5–8 | 4 mg (4000 mcg) | 40 units (0.40 mL) |
| Weeks 9–12 | 6 mg (6000 mcg) | 60 units (0.60 mL) |
| Weeks 13+ | 8 mg (8000 mcg) | 80 units (0.80 mL) |
Retatrutide 40MG
- Reconstitute: Add 2.0 mL bacteriostatic water → ~20.0 mg/mL concentration.
- Typical weekly range: 2–8 mg once weekly (gradual escalation over 8–12 weeks).
- Easy measuring: At 20.0 mg/mL, 1 unit = 0.01 mL ≈ 200 mcg on a U-100 insulin syringe.
Storage: Lyophilized: freeze at −20 °C (−4 °F); after reconstitution, refrigerate at 2–8 °C (35.6–46.4 °F) for up to 4 weeks
| Week | Daily Dose (mcg) | Units (per injection) (mL) |
| Weeks 1–4 | 2 mg (2000 mcg) | 10 units (0.10 mL) |
| Weeks 5–8 | 4 mg (4000 mcg) | 20 units (0.20 mL) |
| Weeks 9–12 | 6 mg (6000 mcg) | 30 units (0.30 mL) |
| Weeks 13+ | 8 mg (8000 mcg) | 40 units (0.40 mL) |
